Campbell SAT ARGOS Bedienungsanleitung PDF herunterladen (Seite 38)

ZENO

-3200 USER MANUAL

Coastal Environmental Systems (206) 682-6048

Page 30

As you can see, the value for Line Item #1 (the Sensor Type Code) has been set to a 12-bit ADC sensor.

The other Line Items that have appeared are the relevant fields that can be set for a 12-bit ADC sensor

that tell ZENOSOFT

how to collect data from the sensor.

The library that ZENOSOFT

maintains about each Sensor Type includes

the specific Line Items that fully define the complete Sensor Type

Definition.

The Line Item numbers that fully describe a complete Sensor Type

Definition are always in the same location for any Sensor Type Code.

The second Line Item is the Sensor Name. The Sensor Name is an optional field that allows you to write

up to an 8-character name to uniquely identify a particular Sensor Record.

Sensor Names are extremely useful because when a configuration has many

Sensor Records with the same Sensor Type Code, they will help you

remember which Sensor Record is collecting data from which sensor.

As an example, you want to collect data from four 18-bit ADC single-ended sensors. The four sensors

measure wind speed, wind direction, temperature and humidity. The four Sensor Records that define

these four sensors are numbered one (1) through four (4). What happens if you do not look at the

configuration for a long period of time? How can you remember which Sensor Record collects which

sensor data? You can use the Sensor Record number as identification, or you can assign sensor names

such as "WS," "WD," "Temp," and "Humid" for the four Sensor Records. Most people will probably find

it much easier to differentiate Sensor Records if they assign unique sensor names.

In our example configuration, Sensor Record #1 is going to measure data from the Internal Temperature

Sensor. An appropriate Sensor Name for line item #2 could be "IntTemp". If you want to set the Sensor

Name to "IntTemp", type the command C2/IntTemp{ENTER} in the Sensor Menu.

Your screen should now look something like this:

Refer to Section 10.3 for the complete library of supported sensor types.

Refer to Section 10.3.6.

No quotation marks are used in the command.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 393 394

Keine Kommentare

Campbell SAT ARGOS Bedienungsanleitung Seite 38