Campbell SAT ARGOS Bedienungsanleitung PDF herunterladen (Seite 174)

ZENO

-3200 USER MANUAL

Coastal Environmental Systems (206) 682-6048

Page 166

Sample Interval |---------------------------------------| 20s

Sample Duration |-------------------------------------| | 19s

Sensor Timing Loop ^ ^ ^ ^ ^ ^ ^ ^ 2.5s

Sensor Reading at each ^

The Sensor Timing Loop (Line Item #12) defines how often the ZENO

-3200 will take a reading from

the sensor through a Sample Duration. There are four Sample Timing Loops and they are numbered 1

through 4. The period of each Sensor Timing Loop is defined in seconds.

The smallest resolution that can be set for a Sensor Timing Loop period is

0.5 of a second.

The period for Sensor Timing Loop #1 is always set to 0.5 seconds, but the

settings for Sensor Timing Loops #2, #3 and #4 can be changed via the

Sensor Timing Loop Menu.

The Sensor Timing Loop Menu is accessible from the Zeno Program Menu. If you are in the Sensor

Menu, return to the Zeno Program Menu by typing the command Z{ENTER}. Once in the Zeno Program

Menu, type the command T{ENTER} to enter the Sensor Timing Menu and the screen should look

something like this:

ZENO PROGRAM MENU

(S) Sensor Menu (M) Memory Management Menu

(P) Process Menu (W) Password Menu

(D) Data Output Menu (R) Reset System

(T) Sensor Timing Loop Menu (E) Save Parameters To EEPROM

(O) Output Message Timing Menu (U) User Menu

(L) System Load Menu (Q) Quit

(G) General Serial Script Menu (H) Help

> T

SENSOR TIMING LOOP MENU

(Cn/m) Change Item n To Value m (H) Help

(Z) Zeno Program Menu

Item 1: 0.5 (Timing Loop #1 Period)

Item 2: 1.0 (Timing Loop #2 Period)

Item 3: 1.5 (Timing Loop #3 Period)

Item 4: 10.0 (Timing Loop #4 Period)

In the above example, the ZENO

-3200 will collect data from any sensor using Sensor Timing Loop #1

every 0.5 seconds and from any sensor using Sensor Timing Loop #2 every second. The ZENO

-3200

will collect data from any sensor using Sensor Timing Loop #3 every 1.5 seconds and from any sensor

using Sensor Timing Loop #4 at every 10.0 seconds.

The values set for Sensor Timing Loops #2, #3 and #4 can be set to any value at or above 0.5 seconds and

be divisible by 0.5 seconds.

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 393 394

Kommentare zu diesen Handbüchern

Keine Kommentare

Campbell SAT ARGOS Bedienungsanleitung Seite 174

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Campbell SAT ARGOS