Campbell RF410 Bedienerhandbuch PDF herunterladen (Seite 22)

PakBus Networking Guide

and AirTemp_C. The values associated with these will update every 10

seconds which is the scan rate of TEMP_PROBE.CR2.

FIGURE 11. Display of CR205_2 Variables

h. Connect to and view AirTemp_C, etc. in CR205_3.

i. Your PakBus Network is now functioning. You can collect data, send a

different program, or monitor any of the three PakBus dataloggers.

j. With LoggerNet not beaconing, you must connect to CR10XPB_1 to

discover it. CR10XPB_1 has CR105_2 and CR205_3 in its Potential

Neighbor list so it will quickly discover them and make them neighbors.

LoggerNet needs to connect using a static route (from the device map) the

first time it connects to CR10XPB_1. Once LoggerNet communicates with

the CR10XPB it creates a dynamic route and keeps it in its routing table.

3. Choosing a PakBus Network Configuration

3.1 PakBus Overview

3.1.1 PakBus vs. Mixed-array

Mixed-array dataloggers include the older CR10, 21X, CR7 and CR500 and are

programmed using Edlog, however, these do not support PakBus operating

systems (OSs). The CR10X, CR510, and CR23X can be configured as mixed-

array dataloggers but they also accept a PakBus OS because their OSs are

stored in flash memory or Eprom and can easily be changed via CSI’s OS

download utility.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 123 124

Keine Kommentare

Campbell RF410 Bedienerhandbuch Seite 22