Campbell RF410 Bedienerhandbuch PDF herunterladen (Seite 108)

Appendix G. Phone to CR205s Network

G-2

LoggerNet Schedule Tab

Collection Interval – 15 minutes

Primary Retry Intervals – 5 minutes

Number of Primary Retries – 2

Secondary Retry Interval – 60 minutes

RF400 Settings

In a PakBus rf network, all RF400 Series radios are set up the same, except,

possibly, the com ports.

1. Configure RF400 radio with the same network address, radio address, and

hopping sequence as the CR205s. If there will be no other RF400s in the

area, you can use default settings, otherwise, choose some other hopping

sequence, network address, and radio address and configure all radios in

the network alike.

2. Other Settings

Active Interface = “COM2xx to RF400”

Standby Mode = “<24 mA always on” (other modes work in some

situations if other network radios are the same)

CR205s Settings and Program

1. Configure all CR205s with the same radio address, network address, and

hopping sequence using the same settings as the RF400 has.

2. Configure each CR205 with a unique PakBus address (“Datalogger

Address” in PakCom) starting with address “1” and ending with address

“5.”

3. Configure CR205s Power Mode = RF_ON

Configure CR205s Radio Force On = 0

4. In LoggerNet CRBasic key in the following program for the CR205s:

'CR200

Public TimeUntilTx

Public HostResponse, Host(3) '0=success, -1=rcvd permit denied, -

2=rcvd insuff resources

Alias Host(1) = HostBattery 'store time-slot and clock from Host

Alias Host(2) = HostTemp

Dim Remote(3)

Alias Remote(1) = Batt_volt

Alias Remote(2) = Therm_C

Alias Remote(3) = Therm_F

Public Thermister_C

Public Thermister_F

Dim Vout

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 123 124

Keine Kommentare

Campbell RF410 Bedienerhandbuch Seite 108