Campbell NL100 Bedienungsanleitung PDF herunterladen (Seite 9)

November 2005, ARM-TR-069

A-1

SURTHREF

Preventative Maintenance Procedures

Frequency: Bi-Weekly

Mentor: Michael Ritsche, Barry Lesht

The following procedures are for performing the scheduled bi-weekly maintenance. All results

should be recorded on the PM checklist.

INSPECTION OF SITE GROUNDS NEAR THE INSTRUMENT

Visually inspect the site grounds around the instrument shelter for hazards such as rodent

burrows, buried conduit trench settling, and insect nests.

Checklist Response: No problems noted.

Problem: See CM Report

Problem: See Comments

VISUAL INSPECTION OF INSTRUMENT COMPONENTS

Stevenson Screen

Check that the Stevenson Screen is in good working order. Ensure that the paint is in good shape

and that all hardware (hinges, latches, etc) is in good shape. Check for excessive rust on moving

metallic parts, cracked components and/or slats of the Stevenson Screen. Periodic painting of the

Stevenson Screen may be required.

Checklist Response: No problems noted.

Problem: See CM Report

Problem: See Comments

Conduit, Cables, and Connectors

Check that all conduits and cables on the bottom of the control box are secure. Check all cables

and conduits for damage. Check all sensor and electrical wires inside the control box for damage.

Check the tightness of all sensor connection at the data logger. Check for water intrusion and that

the fan or heater is working.

Checklist Response: No problems noted.

Problem: See CM Report

Problem: See Comments

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Keine Kommentare

Campbell NL100 Bedienungsanleitung Seite 9