Campbell NL100 Bedienungsanleitung PDF herunterladen (Seite 36)

November 2005, ARM-TR-069

F-1

NL-100 SET-UP

In order to communicate with the NL-100 you need a Null-modem cable and a PC or Laptop with

a terminal communication package. It is assumed for the rest of this document that

HyperTerminal is used. You will also need 12VDC to power the NL-100.

Connect the null modem cable to the PC and the NL-100. You will need a cable with female

connections at both ends. Use gender adaptors if necessary. If this is the first time

communicating with the NL-100 after receipt from factory, go to step 1b.

1a. Open NL-100 by removing four screws. Connect boot jumper across both terminals.

1b. Connect power to NL-100 and connect Null Modem cable.

1c. Open hyperterminal and use following settings:

baud: 115200

databits: 8

parity: none

stop bits: one

flow control: none

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Keine Kommentare

Campbell NL100 Bedienungsanleitung Seite 36