Campbell NL100 Bedienungsanleitung PDF herunterladen (Seite 5)

November 2005, ARM-TR-069

2. Inform the instrument mentor if the troubleshooting techniques in this manual or from

experience are unable to locate/fix the problem.

Michael T. Ritsche

Argonne National Laboratory

Building 203

9700 S. Cass Ave

Argonne, Illinois 60439

Office: (630) 252-1554

FAX: (630) 252-5498

Email:

Dr. Barry M. Lesht

Argonne National Laboratory

Building 203

9700 S. Cass Ave

Argonne, Illinois 60439

Office: (630) 252-1554

FAX: (630) 252-5498

Email:

7. Depot Maintenance

Some components have been replaced due to malfunction or being out of tolerance and will be

returned to the vendor and/or manufacturer for service and/or repair. Normally, this will be done

after consultation with the instrument mentor. Many items can and will be repaired in the Repair

Lab at the SGP site’s Central Facility. All sensors will be returned to the SGP Central Facility

and given to George Sawyer. He will either have them repaired under warranty, repaired in-

house in the Repair Lab or send them to the appropriate vendor. If a unit or system has to be

shipped to the SGP site, ship to the address listed below. An ARM SGP shipment notification

form must be filled out and sent to SGP before the shipment arrives. A link to that form is below.

George Sawyer

ARM SGP CART Site

309600 EW 28

Billings, Oklahoma 74630

Voice: (580) 388-4053

FAX: (580) 388-4052

Email:

http://sdsops.arm.gov/shipping/shipnote.html

The phone numbers below are the contact numbers to get the Return Material Authorization

(RMA) numbers required for return of the sensors. Serial numbers and the reason for return are

required.

1 2 3 4 5 6 7 8 9 10 ... 43 44

Keine Kommentare

Campbell NL100 Bedienungsanleitung Seite 5