Campbell RF400 Handbuch PDF herunterladen (Seite 19)

RF401-series and RF430-series Spread Spectrum Radio/Modems

c. If using an RF430, install the USB drivers to the PC by doing the

following procedures. Install drivers BEFORE connecting the RF430 to

the PC.

• Obtain software drivers from one of the following sources.

Source 1: Insert the CD supplied with a new RF430. The CD should

auto run and present a menu (if not, open AutoRun.exe). Click on

[Install Drivers] button.

Source 2: Obtain the file at www.campbellsci.com/downloads, and

copy it to a PC drive. Open the file and follow the prompts.

• Follow the on-screen prompts to copy driver files to the PC.

• Install drivers for RF430 as outlined in Table 1. PC Driver

Installation. Procedures differ for different Windows® operating

systems and assume driver files have been copied to the PC.

TABLE 1. PC Driver Installation

Windows® XP Windows® Vista Windows® 7

1. Connect the RF430

radio to a computer

USB port via the

USB cable

2. The Found New

Hardware Wizard

window will open.

Select “No, not this

time,” when asked

to connect to

Windows® Update,

then click Next.

3. Select “Install the

software

automatically,” then

click Next.

4. If the Windows®

Security window

appears, select

“Install this driver

software anyway”

to continue.

5. Click Finish to

close the found New

Hardware Wizard

window.

1. Connect the RF430

radio to a computer

USB port via the

USB cable

2. The Found New

Hardware window

will open. Click on

“Locate and install

driver software.”

3. If the Windows®

Security window

appears, select

“Install this driver

software anyway.”

1. Connect the RF430

radio to a computer

USB port via the

USB cable

2. Windows® 7

configures the

driver

automatically.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 125 126

Kommentare zu diesen Handbüchern

Keine Kommentare

Campbell RF400 Handbuch Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Campbell RF400