Campbell CR23X Bedienungsanleitung PDF herunterladen (Seite 5)

Fig. 2 Definition of the logger program file

Give a file name for example “temp_measurement” and press “Open”. On the next

window (we want to make a new file) press “Yes” to create the new file. Then, choose

the appropriate data logger “CR10X” and press “OK”. In the next window leave the

scanning time at 10 s and press “OK”. Now you will be returned to the main menu (Fig.

1) and ALL the buttons will be active.

3. Now we wish to define the type of sensor we will be taking measurements with. Press the

“sensors” button and, in the window popping up, choose (under “Available Sensors”)

<Sensors for CR10X/Temperature/> T-type (copper constantan) thermocouple (see Fig.

3). Then push the red arrow and the next window (Fig. 4) shows up. Choose temperature

range corresponding to “-46 to 50 C” Deg C and “Prog_Sig” from Reference

Temperature Measurement, then press “OK” and the window from Fig. 3 will show up

again.

Fig. 3 Defining thermocouple type.

1 2 3 4 5 6 7 8 9 10 ... 25 26

Keine Kommentare

Campbell CR23X Bedienungsanleitung Seite 5