Campbell CDM-VW300 Series Handbuch PDF herunterladen (Seite 76)

Appendix B. SC-CPI Datalogger to CPI Interface

lug to a suitable ground should be made. Cabling between the datalogger and

the SC-CPI should be as short as possible.

To configure the SC-CPI with a PC requires a software driver be installed on

the PC. This driver is automatically installed when DVWTool or DevConfig

software is installed. Once the driver is installed, a USB cable can be

connected between the PC and the SC-CPI. As indicated in FIGURE B-1,

DevConfig can then be used to check the SC-CPI OS version and examine

other settings and operational statistics such as:

• CPI communication diagnostics

• Serial or CPI load

• CPI frame errors

• CPI network information

FIGURE B-1. Connection to the SC-CPI in DevConfig

Refer to the help window in the DevConfig Settings Editor tab for further

details about operations that can be performed and information that is

available.

B-2

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 121 122

Keine Kommentare

Campbell CDM-VW300 Series Handbuch Seite 76