
RF416 (2.4 GHz) Antennas
Indoor, Omnidirectional
16005 0 dBd, ½ wave whip articulating. An RPSMA
connector attaches directly to the radio; no
antenna cable is needed.
Outdoor, Yagi
16755 13 dBd with mounts. Its type N female
connector attaches to an antenna cable
(COAXRPSMA-L or COAXNTN-L).
Antenna Cables and Surge Protectors for Outdoor Antennas
Recommended for cable lengths less than 10 ft
COAXRPSMA-L Low-loss RG58 antenna cable with reverse
polarity, SMA connector and type N male
connector. Specify length, in feet, after the L.
Recommended for cable lengths greater than 10 ft and/or use
with lightning protection
COAXNTN-L Low-loss RG8 antenna cable with type N male
to type N male connectors (requires 14462 or
16982). Specify length, in feet, after the L.
14462 Antenna surge protector kit for 900 MHz
radios. Includes one COAXRPSMA-L1.5.
Requires the COAXNTN-L cable.
16982 Antenna surge protector kit for 2.4 GHz radios.
Includes one COAXRPSMA-L1.5. Requires the
COAXNTN-L cable.
Additional Accessories
14291 Optional power cable
CM230 Adjustable Angle Mounting Kit for our
outdoor antennas
14162 Mounting bracket kit that attaches the radio to
the backplate of an environmental enclosure.
15966 Wall charger for base station radio
The 16005 antenna has an articulating knuckle joint
that can be oriented vertically or at right angles.
For the 16755 Yagi antenna, the primary and secondary
elements are enclosed in a white cylinder.
The purchase of an antenna cable (COAXRPSMA-L
shown) is required for our outdoor antennas.
The surge protectors help protect the radios from elec-
trical transients conducted through the antenna cable.
When using the CM230, fix the
declination of the antenna by tight-
ening the u-bolt that mounts on
the mast. The inclination is then
adjusted with the other set of u-
bolts and nuts.
Kommentare zu diesen Handbüchern