Campbell CR23X Spezifikationen Seite 273

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 374
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 272
APPENDIX C. BINARY TELECOMMUNICATIONS
C-5
ABCDEFGH DATA TYPE AND SECOND BYTE FORMAT
111111XX A,B,C, = 1 - Start of Output Array, G & H are the most
significant bits of the Output Array ID. All 8 bits of the
2nd byte are also included in the ID.
XX0111XX C = 0 - First byte of a 4 byte value.
001111XX A,B = 0; C = 1 - Third byte of a 4 byte value.
01111111 A = 0; remaining bits = 1 - First byte of a 2 byte
"dummy" word. The CR23X always transmits a 0 for
the 2nd byte, but the word can be decoded on the basis
of the 1st byte only.
HIGH RESOLUTION FORMAT
Continuing to use the A-H bit representation, the four byte number is shown below as two two byte pairs.
AB0111GH XXXXXXXX 001111GH XXXXXXXX
BITS, 1ST BYTE,
1ST PAIR DESCRIPTION
CDEF = 0111 Code designating 1st byte pair of four byte number.
B Polarity , 0 = +, 1 = -.
G,H,A, Decimal locator as defined below.
2nd byte 16th - 9th bit (left to right) of 17 bit binary value.
ABCDEF = 001111 Code designating 2nd byte pair of four byte number.
G Unused bit.
H 17th and MSB of 17 bit binary value.
2nd byte 8th - 1st bit (left to right) of 17 bit binary value.
CSI defines the largest allowable range of a
high resolution number to be 99999.
Interpretation of the decimal locator for a 4 byte
data value is given below. The decimal equivalent
of bits GH is the negative exponent to the base 10.
BITS DECIMAL FORMAT
G H A 5 digits
0 0 0 XXXXX.
0 0 1 XXXX.X
0 1 0 XXX.XX
0 1 1 XX.XXX
1 0 0 X.XXXX
1 0 1 .XXXXX
C.3 GENERATION OF SIGNATURE
At the end of a binary transmission, a signature
is sent. The signature is a 2 byte integer value
which is a function of the data and the
sequence of data in the Output Array. It is
derived with an algorithm that assures a
99.998% probability of detecting a change in the
data or its sequence. The CR23X calculates
the signature using each transmitted byte
beginning with the Final Storage format data
(for K command, echo and carriage return line
feed are not included) until the 2 byte signature
itself. By calculating the signature of the
received data and comparing it to the
transmitted signature, it can be determined
whether the data was received correctly.
Seitenansicht 272
1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 373 374

Kommentare zu diesen Handbüchern

Keine Kommentare