3
* e factory default settings for the logger may not match the settings for the RF401-series radio; therefore, the logger and radio must be recon-
gured before communications can take place. e "Quick Reference Guide for Setting Up RF401-to-CR206 Communications" application note
provides more information (see www.campbellsci.com/app-notes).
Models/Communications
All of the models can communicate with a PC via
direct connect, NL100 Ethernet Interface, MD485
multidrop modem, and our digital cellular modems.
Data can also be viewed on the CD295 DataView II
Display, Archer-PCon Field PC, or a user-supplied
PDA (PConnect or PConnectCE so ware required).
Other communications supported are model dependent:
CR200X• —base model (i.e, only supports direct
connect, Ethernet, digital cellular modems, MD485
multidrop modems, CD295 DataView II displays,
Archer-PCon Field PC, and user-supplied PDAs).
CR206X• —includes an internal 915 MHz, 100 mW
spread spectrum radio that transmits data to
another CR206(X) datalogger, an RF401 radio*, or
an RF430 radio. e 915 MHz frequency is used
in the US and Canada.
CR211X• —includes an internal 922 MHz, 100 mW
spread spectrum radio that transmits data to
another CR211(X) datalogger, an RF411 radio*, or
an RF431 radio. e 922 MHz frequency is used
in Australia and Israel.
CR216X• —includes an internal 2.4 GHz, 50 mW
spread spectrum radio that transmits data to an-
other CR216(X) datalogger, an RF416 radio*, or an
RF432 radio. e 2.4 GHz frequency can be used in
many countries worldwide.
CR295X• —includes an additional 9-pin serial port
that allows communications with the TX320 HDR
GOES satellite transmitter.
Program Development Tools
e programming language of the CR200X-series
dataloggers is CRBasic. Datalogger programs are de-
veloped using a program editor (programs cannot be
created or edited in the datalogger). Program editors
that can be used with these dataloggers include the
CRBasic Editor and Short Cut. e CRBasic Editor
is included in our PC400 and LoggerNet Datalogger
Support So ware. Short Cut can be obtained, at no
charge, from: www.campbellsci.com/downloads
Communication & Data Collection Tools
PC200W
PC200W, our starter communications so ware, sup-
ports direct communications between a PC and a
CR200X-series datalogger and provides numeric dis-
play of measurements PC200W can be obtained, at no
charge, from: www.campbellsci.com/downloads
PC400
PC400 Datalogger Support Software supports
programming, manual data collection, and data
display. Both direct and telemetry communications
are supported.
LoggerNet 2.1 or higher
Besides providing all of PC400’s functions, LoggerNet
Datalogger Support So ware supports automatic data
collection and PB® routing.
Short Cut is available from our website (at no charge) and
Resource CD. It is also bundled with PC200W, PC400, and
LoggerNet Software.
The CR295X and our TX320 transmitter
are used for stream stage (shown),
water quality, and rainfall applications.
(24 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern