Campbell IPn3Gb Bedienungsanleitung PDF herunterladen (Seite 15)

CC5MPX Digital Camera and IPn3Gb Cellular Modem

Figure 3-5 - CC5MPX Power Control Example

Enable the communication power control and set the Communication Warm up

Time to 120 Seconds. A warm up time is required for the modem to register

onto the data network. In-house testing has indicated that 120 seconds

provides sufficient time for the IPn3Gb modem. However, a longer period

maybe required depending on location and cellular coverage.

The CC5MPX camera switches the power on the Communication Power

Control line when an email or an FTP file transfer is required. When a

capture event is triggered to send out an email or FTP transfer, the camera will

switch on power on the modem (yellow wire), wait for the duration of the

Communication Warm up Time and then attempt to send out the image or

video. Once the image has been sent, the camera will switch off power.

The yellow wire from the CC5MPX must be connected to Vin+ on the modem.

The modem’s GND terminal must be wired to the ground of the CC5MPX

power supply (using a user-supplied wire).

The following shows a CC5MPX setup for Self-timed Capture 1 to send out a

still image using email every 15 minutes.

1 2 ... 10 11 12 13 14 15 16

Keine Kommentare

Campbell IPn3Gb Bedienungsanleitung Seite 15