Campbell GPS16X-HVS Bedienerhandbuch PDF herunterladen (Seite 6)

GPS16X-HVS GPS Receiver

Figure 0—1 GPS16X-HVS GPS Receiver

1. Overview

The GPS16X-HVS is a complete GPS receiver manufactured by Garmin

International, Inc. The GPS16X-HVS has been configured by Campbell

Scientific (Canada) Corp. (CSI) to work with CSI dataloggers.

The CR1000, CR3000, CR800, and CR850 dataloggers use serial input

instructions and string handling functions to read, parse and store GPS data.

The CR23X, and other dataloggers that support P15 or the SDM-SIO4 four

channel serial interface can be used with the GPS16X-HVS. Note that the

GPS16X-HVS is not compatible with the CR510, CR10X, or CR200.

The GPS16X-HVS includes the GPS receiver and antenna in the same housing

with one cable for the power supply and communications. The GPS antenna

must have a clear view of the sky. Generally the GPS antenna will not work

indoors.

The GPS16X-HVS is a 12-channel GPS receiver that supports FAA Wide Area

Augmentation System (WAAS) or RTCM differential GPS. Also supported is

the 1 Pulse Per Second (PPS) timing signal. The cable connections provided

with the GPS16X-HVS do not support differential GPS correction. The cable

can be modified by the user if differential correction is required.

2. Wiring

Wiring for the GPS16X-HVS can be done with or without the RJ45 connector.

When shipped from Campbell Scientific, the GPS16X-HVS has an RJ45

connector attached to the cable end. The GPS16X-HVS can be purchased with

an RJ45 adapter with flying leads, an RJ45 to DB9 RS-232 adapter, and the

C1737 mount. Table 2-1 is the wiring description for the RJ45 adapter with

flying leads. To use Table 2-2, the RJ45 connector must be cut off the cable.

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Keine Kommentare

Campbell GPS16X-HVS Bedienerhandbuch Seite 6