Campbell HydroSense II Bedienerhandbuch PDF herunterladen (Seite 31)

HS2 and HS2P

7. Carefully replace the back cover of the display and replace the four

screws.

8. Turn over the display and hold the button for 3 seconds to activate.

9. If using the HS2P, reinstall the display onto the pole.

11.2 Removing Display from HS2P Pole

1. Disconnect the sensor cable at the bottom of the display.

2. Squeeze the clip to release the display from its holder.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

Keine Kommentare

Campbell HydroSense II Bedienerhandbuch Seite 31