Campbell CR850 Spezifikationen PDF herunterladen (Seite 25)

CR800 and CR850 Overview

2. The CRBasic Editor is a program editor used to create more complex

CR800 programs. Short Cut generated programs can be imported into the

CRBasic Editor for adding instructions, or for functionality not supported

by Short Cut.

For those users of CR10X dataloggers who are switching to CR800

dataloggers, the Transformer Utility can be used to convert a CR10X program

to a CR800 program, which can be imported into the CRBasic Editor. Because

of differences in program code, not all CR10X programs can be fully

converted by the Transformer. The Transformer Utility is included with

PC400 and LoggerNet software.

OV4.2 Connections to the CR800

Campbell Scientific Power Supplies are described in Section 1.3. When

connecting power to the CR800, first remove the green power connector from

the CR800 front panel. Insert the positive 12V lead into the terminal labeled

“12V”, and the ground lead into the terminal labeled “G”. Double-check the

polarity before plugging the green connector into the panel.

Connect the white serial cable (PN 10873, provided) between the port labeled

“RS232” on the CR800 and the serial port on the computer. For computers

that have only a USB port, a USB Serial Adaptor (PN 17394 or equivalent) is

required.

FIGURE OV4-1. CR850 with Power Connections

OV-21

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 49 50

Keine Kommentare

Campbell CR850 Spezifikationen Seite 25