CFM100 Compact Flash Module Instruction Manual Issued: 30.7.12 Copyright © 2000-2012 Campbell Sci
CFM100 CompactFlash Module 1-2 STATUSCARDCONTROLMADE IN USALogan, UtahCFM100CompactFlash Memory ModuleSN:12057 Figure 1-1. CompactFlash Module 1.2
Section 1. CFM100 CompactFlash® Module Overview 1-3 1.3 Power 1.3.1 Primary Power The CompactFlash Module is powered by 12 VDC received from the da
CFM100 CompactFlash Module 1-4 The CardOut instruction has the following parameters: StopRing: A constant is entered for the StopRing parameter to s
Section 2. File Formats This section covers the different types of files stored on the CF card 2.1 Data Files The datalogger stores data on the CF c
CFM100 Compact Flash Module Test the power-up functions in the office before going into the field to ensure the power-up file is configured correctly
Section 2. File Formats Table 2.3.1-1. Powerup.ini Commands Command Description 1 Run always, preserve CF data files 2 Run on power-up 5 Format 6
CFM100 Compact Flash Module 3) If neither Run on Power-up nor Run Now programs are changed, the previous Run on Power-up program runs. 2.3.4 Example
Section 3. Programming 3.1 The CardOut Instruction The CardOut Instruction is used to send data to a CF card. The CardOut Instruction must be enter
CFM Compact Flash Module PROGRAM 'CR1000 Public temp DataTable (Table1,1,-1) CardOut (0, -1) Maximum (1,temp,FP2,False,False) Minimum (1,t
Section 3. Programming Tables 3 and 4 will output the maximum and minimum of the panel temperature and battery voltage to the card once every five se
CFM Compact Flash Module 3.3 Table Size and Mode The size of each data table in CPU memory is set as part of the DataTable instruction and the size o
4-1 Section 4. Data Retrieval Data stored on CF cards can be retrieved through a communication link to the datalogger or by removing the card and car
CFM100 CompactFlash Module 4-2 4.2.2 Reinserting the Card If the same card is inserted again into the CFM100, the datalogger will store all data to
Section 4. Data Retrieval 4-3 data is copied, use Windows Explorer to delete all data files from the card. NOTE: Windows98 and WindowsME users need
CFM100 CompactFlash Module 4-4
Appendix A. Formatting CF Card The CF card can be formatted using 1) Windows Explorer, 2) the CR1000KD or 3) LoggerNet File Control. A.1 Windows Exp
CFM100 Compact Flash Module 5) Choose FAT32 under file system, give the card a label, then Start. (The CR1000 will work with either FAT or FAT 32.)
Appendix A. Formatting CF Card 3) Choose FileControl under the Tools menu of the Connect screen. 4) Highlight CRD. 5) Press Format. 6) Press Yes
CFM100 Compact Flash Module This is a blank page. A-4
Appendix B. PC/CF Card Information PC or CompactFlash (CF) cards provide a relatively inexpensive, off-the-shelf means of retrieving data from many o
Guarantee This equipment is guaranteed against defects in materials and workmanship. This guarantee applies for twelve months from date of delivery.
CFM100 Compact Flash Module There are two types of CF cards available today: Industrial grade and Standard or Commercial grade. Industrial grade PC/
Appendix B. PC/CF Card Information This is a blank page. B-3
CAMPBELL SCIENTIFIC COMPANIES Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel
PLEASE READ FIRST About this manual Please note that this manual was originally produced by Campbell Scientific Inc. primarily for the North American
i Contents PDF viewers note: These page numbers refer to the printed version of this document. Use the Adobe Acrobat® bookmarks tab for links to spe
ii Figure 1-1. Compact Flash Module ...... 1-2 Tables 2.3.1-1 Powerup.ini Commands
1-1 Section 1. CFM100 CompactFlash® Module Overview Campbell Scientific’s CFM100 CompactFlash® Module stores the datalogger’s data on a removable Com
Kommentare zu diesen Handbüchern